|
Manufacturer: Dura-Vent
Part: Belted Cuff, Nylon Ring
For utility blower hoses, Belted Cuffs cinch for a secure fit to most stationary or
portable blower units.
Nylon Rings interlock, for quick connecting of utility blower hoses.
|
Specifications:
Belted Cuff: available for 3" - 24" ID Duct Hoses
Nylon Ring: available for 3" - 24" ID Duct Hoses
|
|
|
Manufacturer: Dura-Vent
Part: Standard Cuff
Standard cuffs are available on all Dura-Vent products except Garage Exhaust Hose.
For a secure fit, standard cuffs are manufactured as an integral part of hose for best pressure
resistance.
|
Specifications:
Standard Cuff: 1" - 24" ID
(see hose type)
Order "OAL", over all length, end to end.
|
|
|
Manufacturer: Dura-Vent
Part: Enlarged or Reduced Cuffs
When coupling hose to non-standard OD equipment, generally hose can be manufactured to match your equipment size (for optimum air flow). Consult the sales department for details.
|
Specifications:
Inside Diameter: 1" - 24" (see hose type)
Available as a foam wrap, or sewn-on end, depending on variance.
|
|
|
Manufacturer: Dura-Vent
Part: Thermal-Wrap
Mylar wrap with fleeced foam insulation. Jacket zipper for "wrap and zip" to
any hose. Re-useable.
Designed for the preheating of injection mold dryers. Recommended for handling hot or cold
air, dust, fumes and light powders where constant temperatures must be maintained.
|
Specifications:
Sizes: 3/4" - 12" ID
Standard Lengths: 6 Ft. or 12 Ft.
Colors: Silver
Temp. Range: 350° F.
Options: Heavier Duty 2FS-I avail. for higher temperature range.
|
|
|
Manufacturer: Dura-Vent
Part: Bridge Clamps, Screw Clamps
Bridge clamps are pre-formed to bridge helical wire, providing a secure fit without leakage
(for non-cuffed hoses). Left hand spiral available (50 piece minimum). Standard screw clamps
also available.
|
Specifications:
Sizes:
Bridge clamps: 2" - 20" ID
Screw clamps: 3" - 24" ID
|
|
|
Manufacturer: Dura-Vent
Part: Latch Loc Couplers
Latch Loc Couplers, made from 16 gauge, galvanized steel, provide a positive lock that
won't work loose in ordinary use. Easily attached on site with any standard banding or bridge clamp. Reusable.
|
Specifications:
Sizes: 4" - 24" ID
Available custom attached to hose.
|
|
|
Manufacturer: Dura-Vent
Part: Slip Loc Couplers
In 304 stainless steel or galvanized steel, Slip Loc couplers provide a quick,
convenient means of coupling hose on site when banded with screw clamps. Reuseable.
|
Specifications:
Sizes: 4" - 18" ID
Available custom attached to hose.
|
|
|
Manufacturer: Dura-Vent
Part: Hose Stand
Stowage rack for utility blower hose.
|
Specifications:
Compress lengths up to 25' for storage, 36" stowed length. Ideal for confined space
and mobile units.
|
|
Dura-Vent pg1 | Blue-Max duct hose | Econo-Max ducting | Flex-Flyte ducting | Max-Flyte duct hose | more vent hose
| 
