Home>Industrial Hose and Fittings>Acid and chemical hose>Gates Renegade UHMWPE Chemical hose

Gates Renegade UHMWPE Chemical hose

Renegade™ chemical hose for specialized applications

Recommended for: Tank truck, barge, ship, or storage tank transfer hose for a variety of chemical products. Renegade contains a wire helix for full suction capability, as well as for routing hoses through tight bends.

The Ultrahigh Molecular Weight Polyethylene tube stock has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling.

Renegade is designed for easy cleaning in a bath containing 10 percent (NaOH) at 212°F (100°C). Cleaning in place (CIP) methods may be used.

Sizes (Inside Diameter): 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4".

Consider Gates Renegade chemical hose for use with the following chemicals:
at room temperature unless otherwise stated, contact a product specialist for temperatures above 100 degrees F

Acrylates (HEA or HPA), Aluminum Sulfate Solution (in water), Aminoethanol, Ammonia Aqueous up to 30% NH3, Ammonia Liquor (Colorless Liquid), Barium Chloride, Barium Hydroxide, Barium Sulfide, Bleach Liquor Calcium Hypochlorite/H2O Clear Solution, Boric Acid, Bubble Bath Compounds liquid, Brine, Butanol Butyl Alcohol, Chlorox, citric acid solution in water, Cyclohexane, Diesel Emmissions Fluid, Detergent Sol. (Sodium dodcylbenzenesulfonate) in water, Ethyl Methyl Ketone (MEK), Hydrogen Peroxide (90% or less), Hydrolube (Water Glycol) liquid, Hydroxypropyl Acrylate Acid (HPA Acid) liquid, Iodine solution liquid, Vegetable Oils, Water (Deionized), Water (Distilled)

Featured Products

Gates Renegade UHMWPE Chemical hose assembly

(0)

Products (Total Items: 12)

Sort by:

More results: 1 2 Next Page View All

46970058

1 1/2X200 RENEGADE

46970015

1 inch X 100 feet Gates Renegade Chemical Transfer Hose - bulk - per foot

46970016

1.25 inch X 100 feet Gates Renegade Chemical Transfer Hose - bulk - per foot

46970017

1.5 inch Gates Renegade UHMWPE Chemical Transfer Hose (per foot)

46970057

1X200 RENEGADE

46970018

2 inch X 100 feet Gates Renegade Chemical Transfer Hose - bulk - per foot

46970019

2.5 inch X 100 feet Gates Renegade Chemical Transfer Hose - bulk - per foot

46970059

2X200 RENEGADE

More results: 1 2 Next Page View All

Gates value point: Gatron™
Gates uses a proprietary material called Gatron in many of its Acid-Chemical hose. A blend of rigid cross-linked Polyethylene (XLPE) and a number of other polymers and additives, Gatron offers excellent resistance to a variety of acids and chemicals, while providing much better flexibility, higher temperature compatibility, improved coupling seal, and better resistance to coupling "spinning" in high temperature applications or cleaning operations when compared to competitive XLPE products.

Gatron is the tube material used in Mustang, Mustang CR, and Appaloosa. It is also used as a "back-up" tube for the FEP and UHMWPE liners in the Stallion, Stallion CR, and Renegade. This extra Gatron layer provides a safety factor in the event of a liner tear in the hose, and also adds to hose performance capabilities.

Gatron is a major reason why Gates Acid-Chemical hoses are recognized as the premier line in the industry.

WARNING: A failure of chemical hose in service can result in injury to personnel or damage to property. All chemical hose manufacturers recommend specific tube formulations to handle various chemicals.

Do not use chemical hose at temperatures or pressures above those recommended by the manufacturer. All operators must be thoroughly trained in the care and use of this hose and must at all times wear protective clothing. A hose or system failure could cause the release of a poisonous, corrosive, or flammable material.