Gates Longhorn and Longhorn AF

petroleum transfer hoseLonghorn hose is designed to transfer commercial gasolines, diesel oils, fuel oils and many other petroleum products. It is an ideal choice for oil field service truck use or environmental cleanup and is compatible with clean-burning, renewable Biodiesel B-100.

The corrugated cover version of this hose adds extra flexibility and lowers the force to bend factor for easy handling. Specify Longhorn AF hose for better performance with alternative fuels including E-85 and B-100. Longhorn and Longhorn AF are not for use with jet fuel, jet fuel acts as a solvent to remove the plasticizers, this contaminates the fuel.

Under certain circumstances, Longhorn can be used as a hydraulic system return line. Make sure that the hydraulic fluid temperature doesn't exceed the limits of this hose.

Hose Specifications:
Tube: Type C (Nitrile). Black.
Reinforcement: Synthetic, high tensile textile with steel wire helix.
Cover: Type A (Neoprene). Black with red spiral stripe. Smooth or corrugated.
Temperature Range: -40 deg F to +180 deg F (-40 deg C to +82 deg C). Note: fuels are normally conveyed below 120 deg F.
Type of Branding: Continuous transfer label. Example: Longhorn Petroleum Transfer 150 PSI (1.03MPa) WP Made In U.S.A.

Consider Gates Longhorn hose for use with the following chemicals:
at room temperature unless otherwise stated, contact factory for temperatures above 100 degrees F
Aeroshell 7A, ATF (Automatic Transmission Oil) bulk transfer, Bunker Oil, Butanol (Butyl Alcohol) colorless liquid, Crude Oil (Crude Petroleum Oil), Cutting Oil (Mineral Oil Base), Decanol (Decyl Alcohol) colorless water white Liquid, Dirco Oils, Duro Oils, Ethanol (Ethyl Alcohol), Ethylene Glycol, Fuel Oil (ASTM 1-6), Heptane, Hydraulic Fluid (Std. Petroleum Oils) bulk transfer, Insulating Oil (Transformer) liquid, Isooctane colorless liquid, Kerosene, Lubricating Oil (Under 120 deg F / 49 deg C), Machine Oil (Under 135 deg F / 57 deg C), Maxmul (Penzoil Hydraulic Fluid), Methallyl Alcohol (Methylallyl Alcohol), Methanol (Methyl Alcohol), Mineral Oil, Motor Oil bulk transfer, n-Octane, Neohexane, Oil of Turpentine, Petroleum Oils (Refined), Red Oil (Commercial Oleic Acid) (MIL-5606), Refined Wax (Petroleum), Tall Oil, Transformer Oil (Petroleum Type), Vitrea Oils, VM&P Naptha (Mineral Spirits).

Informacion en espanol:
Mangueras para succion y descarga de petroleo. Usarse en: Aplicaciones de succion y descarga extra pesada para el manejo de gasolinas, aceites y otros productos de petroleo en carga y descarga de buque-tanques.

Construccion: Envuelta reforzada con alambre.
Tubo: Nitrilo color negro especialmente compuesto para soportar gasolinas.
Refuerzo: Envuelta con lona de textil sintetico de alta resistencia a la ruptura y bajo coeficiente de deformacion. Reforzada con alambre de acero de alta tenacidad en forma helicoidal.
Cubierta: Neopreno color negro, con franja roja en espiral.
Browse By Category