Home>Industrial Hose and Fittings>Hose couplings and fittings>Dry Disconnect Fittings

Dry Disconnect Fittings

Dry disconnect couplings and fittings for hose, pipe and tanks - sometimes called dry-break couplings or no-spill couplers - serve an important purpose in applications that require maximum containment.

Choose from Anodized Aluminum, 316 Stainless Steel or Brass-Gunmetal. Viton® seals are standard. Optional seal materials are available, contact us for details. The coupler unit has a built-in swivel to relieve twisting in the hose line. Also available with flanges instead of pipe thread. Interchanges with Mann-Tek ® or Todo-matic ® .

Have you noticed that when you shut-off your garden hose and disconnect the nozzle, the water that remains in the hose starts to spill out? With certain liquids such as water and in certain settings such as outdoors, that’s not a problem, but imagine if the liquid was extremely expensive or highly toxic or just plain difficult to clean up. Dry disconnect couplings and fittings for hose, pipe and tanks - sometimes called dry-break couplings or no-spill couplers - serve an important purpose in applications that require maximum containment.

Potential uses include*:

acids and chemicals
detergents and liquid soaps
pesticide concentrates
pharmaceuticals
printing ink

Special models for*:

petroleum and aviation fuels
propane and butane

Sub-Categories

Products (Total Items: 244)

Sort by:

More results: 1 2 3 4 5 6 7 ...31 Next Page View All

1 1/2 inch Adapter by 2 inch 150lb Flange

(0)

1 1/2 inch Adapter by 2 inch 150lb Flange

(0)

1 1/2 inch Adapter by 2 inch 150lb Flange

(0)

1 1/2 inch Alum Dry Disconnect Adapter

(0)

1 1/2 inch Alum Dry Disconnect Adapter

(0)

1 1/2 inch Alum Dry Disconnect Adapter

(0)

1 1/2 inch Alum Dry Disconnect Adapter

(0)

1 1/2 inch Alum Dry Disconnect Adapter

(0)

More results: 1 2 3 4 5 6 7 ...31 Next Page View All

*Use these products only for their intended purpose, under certain circumstances a whipcheck safety cable, grounding cable or breakaway coupling may be required. It is your responsibility to be aware of and in compliance with applicable EPA and OSHA regulations.

Never allow the maximum working pressure or temperature to exceed the maximum working pressure or temperature of the lowest rated component in the assembly. The proper choice of coupling material, gasket material and hose material is determined by temperature, application (how is it being used), material (whats going through it), pressure and regulatory approval requirements.

WARNING: Improper hose and coupling selection, product misuse or use of a damaged hose assembly creates hazardous conditions:

couplings or other parts can fly off with dangerous force
fluid injection injury
dangerous hose whip
sparking, explosion or fire with flammable liquid, gas or dust
release of liquid, gas or materials that may be toxic, flammable, scalding hot, or capable of causing injury